Product Overview
Add extra magazines to your chopped B&T Station 6 and get rid of the awkward gap between the gun and the magazine grip! Our design follows the shape and style of the stock grip to maintain the stock appearance.
Cutting the grip on your B&T Station 6 would normally leave you with one usable magazine and a hand-pinching gap between the magazine and the rest of the gun. Now you can fix that! We have two magazine grips, one that is compatible with most standard 1911 magazines, and one that is compatible with the Wilson Combat compact 45ACP 6-round low-profile 1911 magazine, found here. The low-profile Wilson Combat compact magazine (serial# 47SEN) reduces the overall length of the grip by 11.5mm for a more compact design.
Each magazine grip includes one gasket that fills the gap between the grip and the gun. There are two styles of gasket, with and without adhesive. The gasket with adhesive will securely attach to the magazine grip. The gasket without adhesive can easily be removed or replaced. They are both made from durable EVA foam and measure 3mm thick. We also sell extra gaskets for the grip that you already have and as spares.
We have an FFL that can modify your grip and does excellent work. Feel free to reach out to us for his contact information.
Note: This product will work for both the 45ACP and 9mm variants. Gun, magazine, and suppressor not included. This product includes one magazine grip and one gasket of your choosing.
This product is 3D printed using durable and impact resistant ASA plastic.
Made in the USA
Installation:
The magazine sleeve slides over the magazine from the top. The fit should be tight to the magazine, but it shouldn’t require excessive leverage to force on. If it’s too tight, slowly remove material with a file on the tongue that pushes against the back of the magazine.
Next, slide the gasket onto the magazine. If the gasket has adhesive, take the backing paper off the adhesive first. Wiggle the gasket down to the sleeve and press it into place. Be careful not to let the adhesive stick to the magazine, it will be hard to remove. Take your time installing the gasket if it has adhesive.
