Product Overview
We are now offering +1 and +2 round magazine extensions for most models of Tokarev pistols, including Zastava M57/M57A, Russian TT33, and Chinese Type 54. That means getting up to 10 rounds in your magazine (or 11 rounds where legal). These extensions replace your stock floor plate and locking plate. They use two stainless steel pins to securely stay in place under recoil and when dropped, just like our popular Keltec P32 magazine +1 extensions, here.
Compatibility Notes:
- Russian TT-33/Chinese Type 54 come in +1 and +2 extensions. Check out the +1 High Wall model if you want the M57/M57A magazines to integrate better with your TT33/Type 54. They add +1 capacity to the 9 round magazine and extend to the grip to maintain a clean look.
- Zastava M57/M57A Yugo comes in a +1 extension (or you can choose the +2 extension where legal).
- Please let us know if you have fitment issues. We will work with you to address any issues as best as we can.
The +1 adds 12.5mm off the bottom of the magazine and weighs 8g. The +2 adds 22.5mm off the bottom of the magazine and weighs 12g. The +1 High Wall extensions add 12.5mm to the length of the 9 round magazines and weighs 12g.
Note: Gun and magazine not included. Each quantity (1) is for a single extension with two stainless steel dowel pins to secure them.
All of these extensions are printed in durable and impact resistant carbon fiber filled nylon (PA6-CF20).
Installation:
Remove the stock floor plate and locking plate on your magazine. Slide the extension onto the magazine while the spring is pushed past flush with the bottom of the magazine. Once the extension is fully in place, make sure the spring is seated at the bottom of the extension. Next, push the two included metal pins into the two holes on the extension to lock it into place. You can use pliers to help push the pins in.
Removal requires some patience. Start by using a 1.5mm punch to tap the two anchoring pins out. Next, using the opening in the back of the extension, push the magazine spring into the shell of the magazine. A thin flat head screw driver can work well for this. Slowly pull the extension back while watching to ensure the spring does not bind up. If it does, work the spring back up into the magazine shell. Keep pulling the extension back until it’s removed from the shell.
